Assembly - Stanley ST-70-SS-E Instructions Manual

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR

Assembly

1. Slide axle through Wheel Frame and attach
wheels, washers and nuts.
2. Place main structure on wheel frame and
fasten with long screws provided.
3. Attach safety guard to front of heater with
screws provided.
© 2018 Pinnacle Climate Technologies, Inc.
WHILE CONNECTED TO A POWER SOURCE
4. Attach Radiant Visors to the top and bottom
rear of the Radiant Cone Assembly using extra
screws included.
Radiant Visor
Safety
Guard
Radiant
Cone
Assembly
5. Attach top safety guard using the two
outer-most extra screws on the top of the
radiant cone (See photo).
Note: Save the box and packaging materials for
future storage.
7
Screws