Accessing The Ultrareceiver Low Delay Via Web Browser; Routing Page; Figure 5-1 Web - Vislink UltraReceiver LD User Manual

5.7.2. Accessing the UltraReceiver Low Delay via Web Browser

1. From your chosen browser, in the address bar, enter the IP address for the
unit. The factory default address is:

http://192.168.000.90
2. After a short delay, the menu displays on the webpage (see Figure 5-1).
3. Now make your required configuration changes to the unit using the
webpage.

5.7.3. Routing Page

This webpage gives a diagrammatic view of the signal routing within the
receiver.
Issue No: 2.01
Ref: ULRXLD-ASUM-700X
Figure 5-1 Web Page Example
UltraReceiver LD User Manual
Main Display
Copyright © 2020 Vislink Technologies, Inc.
Page: 25