Table of Contents
Advertisement
Web Browser Control Interface
The HDR-1000 has on-board fi rmware that enables web browser control without the
need to install software.
NOTE:
You must complete the PC Network Setup section before proceeding.
To set-up PC control of your receiver, complete the following steps:
1.
Connect an Ethernet cable to the NETWORK connector on your HDR-1000 and to
your Windows PC.
2.
Open a web browser on your PC and type 192.168.1.100 into the URL address
fi eld and press Enter. The login screen displays.
3.
Enter your user name and password then click the Login button.
NOTE:
The receiver is factory programmed with the user name root and
password root. To avoid unauthorized access, the factory assigned password
should be changed by accessing the System > Change Password tab. See
Change Password section.
Write down your password information here.
Login
Password
Unit S/N
root
root
HDR-1000 User and Technical Manual
Page 11
Advertisement
Table of Contents
