Operation - Bosch BCS212 Original Operating Instructions

English – 2​
Technical Data
Charger
Product code
Rated voltage
Frequency
Battery charging voltage
Charging current (max.)
Charging time
– PowerPack 300, approx.
– PowerPack 400, approx.
– PowerPack 500, approx.
Operating temperature
Storage temperature
Weight, approx.
Protection rating
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Power cable
Article number
Rated voltage – cable
Rated voltage – connector/plug connector
Rated current – connector/plug connector
Material – cable
Safety standard – cable
Safety standard – connector/plug connector
Length, approx.

Operation

Start-up
Connecting the charger to the mains (see figure A)
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the
rating plate of the charger. Chargers marked 230 V can
also be operated at 220 V.
Plug the device connector (3) of the power cable into the
device socket (2) on the charger.
Connect the power cable (country-specific) to the mains.
Charging the removed battery (see figure B)
Switch the battery off and remove it from its holder on the
eBike. When doing so, read and observe the operating in-
structions of the battery.
Ensure the battery is placed on clean surfaces only.
u
Avoid getting dirt, e.g. sand or soil, in the charging socket
and contacts in particular.
0 275 007 XCX | (25.04.2018)
Standard Charger
(36–4/230)
BCS220
V~ 207...264
Hz 47...63
V=
A
hrs
hrs
hrs
°C 0...+40
°C –10...+50
kg
IP 40
V~
V~
A
m
Plug the charging connector (5) of the charger into the
socket (6) on the battery.
Charging the battery on the bike (see figures C and D)
Switch the battery off. Clean the cover of the charging
socket (7). Avoid getting dirt, e.g. sand or soil, in the char-
ging socket and contacts in particular. Lift the cover of the
charging socket (7) and plug the charging connector (5) into
the charging socket (6).
u
Charging process for two batteries
If two batteries are fitted to an eBike, both batteries can be
charged using the uncovered connection. To begin with,
both batteries are charged one after the other until they
reach approx. 80–90 % capacity, then they are both
Standard Charger
(36–4/100-230)
BCS212
90...264
47...63
36
4
2.5
3.5
4.5
0...+40
–10...+50
0.8
IP 40
Australia
1 270 020 344
300
250
10/2.5
PVC
AS/NZS 3191
AS/NZS 3112
AS/NZS 3109
1.5
Charge the battery only in accordance with all safety
instructions. If this is not possible, remove the battery
from the holder and charge it in a more suitable location.
When doing so, read and observe the operating instruc-
tions of the battery.
Compact Charger
(36–2/100-230)
BCS230
90...264
47...63
36
4
2.5
3.5
4.5
0...+40
–10...+50
0.8
IP 40
Japan
1 270 020 332
300
125
PVC
JIS C3304
JIS C8303
Bosch eBike Systems
36
2
5
6.5
7.5
0.6
7
1.5