Toshiba MMD-AP0481HF2UL Service Manual page 75

2
Part names
Outside Air Unit
Air supply port
Cools / heats the outside air and
sends it into the room with the
air supply flange.
Blow temp. sensor
Drain pan
5-EN
Air intake port
Intakes the outside air
with the inlet flange.
Ground screw
It is included in the electrical control box.
– 3 –
3
Part names and functions of the remote
control
Display section
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
• blinks on the display of the remote control the first time the power
switch is turned on.
• The initial settings progress while
control after has disappeared.
NOTE
The LCD may temporarily be blurred due to static electricity.
2
3
4
5
6
16
1
SETTING indicator
Displayed when setting the timer or other
functions.
2
Operation mode indicator
Indicates the operation mode selected.
3
Check code indicator
Displayed when the protective device activates or
a problem occurs.
4
Time display
Indicates time concerning the timer.
(Indicates a check code when a problem occurs)
5
Timer mode indicator
Displays the timer mode.
6
Filter indicator
Reminder to clean the air filter.
TEMP.
is blinking. Start to use the remote
TIMER SET
TIME
FILTER
RESET TEST SET CL SWING/FIX
13
1 7
8
9
10
12
7
TEST run indicator
Displayed during test run.
Display
section
ON / OFF
Operation
FAN MODE
section
SAVE VENT
UNIT LOUVER
14
15
11
6-EN