Monitoring function of remote control switch
When using the remote control (Model Name: RBC-AMT32UL), the following monitoring
function can be utilized.
Calling of display
<Contents>
The temperature of each sensor of the remote control, indoor unit and outdoor unit and the operating
status can be checked by calling the service monitor mode from the remote control.
<Procedure>
1
Push
+
buttons simultaneously for 4 seconds or more to call up the service monitor
mode.
The service monitor goes on and firstly the temperature of the CODE No.
2
Push
button to change CODE No.
(CODE No.) to the CODE No. to be monitored.
For display code, refer to the following table.
3
Push
button (button of left side) to change to item to be monitored.
UNIT LOUVER
The sensor temperature of indoor unit or outdoor unit in its refrigerant line and the
operating status are monitored.
4
Push
button to return the status to the normal display.
2
4
1
TEMP.
TIMER SET
TIME
FILTER
RESET
TEST
SET
CL
Returns to normal display
<Operation procedure>
1
2
3
ON / OFF
FAN
MODE
SAVE
VENT
SWING/FIX
UNIT LOUVER
4
– 47 –
00 00 00 00 00
is displayed.
3