2 Connect the other end of the Ethernet cable to the X1
(WAN) port on your SonicWall SuperMassive appliance.
Testing Your Internet Connection
To test your Internet connection:
1 After you exit the Setup Wizard, connect your
computer to the LAN subnet or directly to the X0 (LAN)
port.
2 Point your browser to the X0 IP address configured
during initial setup (default: 192.168.168.168).
3 When the login page appears, log into the SonicOS
management interface as admin, using the configured
password (default: password).
4 Open a command prompt window on your computer
and enter the command: ping sonicwall.com
5 Open another web browser and navigate to:
https://www.sonicwall.com
If you can view the SonicWall home page, you have configured
your SuperMassive appliance correctly.
If you cannot view the SonicWall home page, try one of these
solutions:
• Verify that the Local Area Connection settings on your
computer are set to use either DHCP or a static IP on
the LAN subnet.
• Renew your computer's DHCP address or restart your
computer to accept new network settings from the
DHCP server in the SonicWall appliance.
• Restart your Internet router to communicate with the
DHCP client in the SonicWall appliance.
• Check Troubleshooting Connections on page 23 for
more suggestions.
NOTE: WAN connectivity issues are unrelated to
completion of the MySonicWall registration process.
SonicWall SuperMassive 9200/9400/9600 Getting Started Guide
21