Buttons - Carrier RG67V/BGEF Owner's Manual

2.2 BUTTONS

On/Off
Press to start operation.
Press again to stop.
Press the mode button to switch the
mode in turn.
My Mode
Press to memorize or resume your
favorite pre-settings.
Swing
Starts and stops louver movement
(see page 7).
Used to set the desired up/down air
flow direction.
Pressing 2 more seconds to activate
or disable Breeze Away feature.
Press to turn on/off the LED display.
Pressing 5 more seconds to altermate
the indoor display between setting
temperature and room temperature.
ECO Sleep
Press to enter Sleep Mode.
Pressing 2 more seconds to activate or
disable Fresh function.
NOTE:
1. Above illustration shows all the features. For actual model, only the relevant parts are shown.
2. Buttons design might be slightly different from the actual one.
Mode
Fix
LED
Mode Fan
My
Swing
X-ECO
Mode
ECO
Timer
Fix
Sleep
High
Follow
LED
Power
Me
Temperature UP
Increases temperature in 1 °C/1
°F increments. Max Temp. is 30
°C/86 °F.
Fan Speed
Press to select the fan speed.
Temperature Down
Decreases temperature in 1°
C/1 °F increments.
Min Temp. is 16 °C/60 °F
NOTE: Press together ˄ & ˅
buttons at the same time for
3 seconds will alternate the
temperature display between
the °C & °F scale.
X-ECO
Press to enter the energy
efficient mode(see page 10).
TIMER ON
Press to set the timer on or off.
High Power(Turbo)
Press to activate/disable the
High power function. Keep
pressing 2 more seconds to
activate/disable Active Clean
function.
Follow Me
Press to activate or clear the
Follow me function. Keep
pressing 7 more seconds to
activate or disable Memory
feature of Follow Me function.
04