RG-10:Service Manual
FUNCTION BUTTONS
Before you use your new system, familiarize yourself with the remote controller. The following is a brief introduction of the remote controller.
NOTE: To alternate between C and F, buttons must be pressed gently, otherwise the remote will not recognize the command.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Fig. 8 — Remote Controller
3
Turns the indoor unit's LED display
and air conditioner buzzer on and,
off, which creates a comfortable and
quiet environment. If you press and
hold LED for 5 seconds, it displays
the return air temperature at the unit
versus the set point temperature.