Trane MWD507 Installation & Operation Manual page 11

3.
4.
AMS-SVX04A-EN
Support the unit fi rmly.
Remove the junction box lid to connect the wire with the terminals.
Make sure that there are enough space for maintenance, as shown in the fi gure (A
Unit length Width);
Select a place for hanging. Mount the suspension rod, and fi x it fi rmly;
Check whether the suspension rod is aligned with the unit, and lift the unit on the
suspension rod;
Set the drainage slope according to the right fi gure. Make sure that there is a gradient in the
direction of drainage of the indoor unit. Then, screw down the nuts on the suspension rod.
Ceiling
Surrounding space of the unit
Suspension rod
Service and maintenance space
Unit Installation
≥50
≥50
A × B at least
B =
11