Azl Display - Riello RLAS 1000 EV Installation, Use And Maintenance Instructions

3.11 AZL display...

Warnings
To avoid accidents, material or environmental dam-
age, observe the following instructions!
The AZL... display is a safety device! Avoid opening
WARNING
or modifying it, or forcing its operation. Riello S.p.A.
cannot assume any responsibility for damage re-
sulting from unauthorised interventions!
The electronic cam is operated and programmed through the AZL5
interface... or with the aid of a PC.
The AZL5 has a backlit LCD display with clear reading of the menu
text and diagnostics.
The Modbus function of the AZL display integrates the electronic
cam LMV5 and through data management allows the diagnostic of
the burner.
The display shows the operating status, the types of errors and
lockouts. Used to parametrize and monitor data.
Technical description of the burner
Technical data
Operating voltage
Power consumption
Protection level of the container
–
–
Safety class
Battery - Manufacturer:
VARTA
DURACELL
SANYO ELECTRIC, Osaka/
Japan
RENATA AG, Itingen/CH
13 GB
S9232
Rear
Front
Fig. 7
AC 24 V - 15% / +10%
< 5W (typical)
IP00 according to IEC 529
IP54 according to IEC 529 (if
installed)
I with parts II and III accord-
ing to DIN EN 60730-1
Type reference:
CR 2430 (LF-1/2 W)
DL 2430
CR 2430 (LF-1/2 W)
CR 2430
Tab. G
20146383