4.13 Azl Display - Riello RS 1300/E C01 Installation, Use And Maintenance Instructions

4.13 AZL Display...

Warnings
To avoid accidents, material or environmental
damage, observe the following instructions!
The AZL... display is a safety device! Avoid open-
WARNING
ing or modifying it, or forcing its operation. Riello
S.p.A. cannot assume any responsibility for dam-
age resulting from unauthorised interventions!
The electronic cam is operated and programmed through the
AZL5 interface... or with the aid of a PC.
The AZL5 has a backlit LCD display with clear reading of the
menu text and diagnostics.
The Modbus function of the AZL display integrates the electronic
cam LMV5 and through data management allows the diagnostic
of the burner.
The display shows the operating status, the types of errors and
lockouts. Used to parameterize and monitor data.
Technical description of the burner
13 GB
S9232
Technical data
Operating voltage
Power consumption
Protection level of the container
– Rear
– Front
Safety class
Battery - Manufacturer:
VARTA
DURACELL
SANYO ELECTRIC, Osaka/
Japan
RENATA AG, Itingen/CH
Fig. 7
AC 24 V - 15% / +10%
< 5W (typical)
IP00 according to IEC 529
IP54 according to IEC 529
(if installed)
I with parts II and III accord-
ing to DIN EN 60730-1
Type reference:
CR 2430 (LF-1/2 W)
DL 2430
CR 2430 (LF-1/2 W)
CR 2430
Tab. G
20089387