Wantegrity HAWK-800 Series Constructions And Installations Instructions page 23

HAWK-800 Constructions and Installations Instructions –
Step 29 - Attach the Ribbon Cables in the EX-800
Locate and install the 28 pin header cable assembly. Be careful to ensure that the pins are lined up correctly with
●
the sockets because it is very easy to incorrectly align the plugs in these sockets. Also take great care to ensure
that you do not bend over any of the pins as you insert the plugs into the sockets. See the picture below.
Locate and install the 16 pin header cable assembly. Be careful to ensure that the pins are lined up correctly with
●
the sockets because it is very easy to incorrectly align the plugs in these sockets. Also take great care to ensure
that you do not bend over any of the pins as you insert the plugs into the sockets. See the picture below.
https://www.hawk800.com
23 Of 29