HAWK-800 Constructions and Installations Instructions –
You should now move on to step 26.
●
Special Section for the Poly-800 (original version)
NOTE: Steps 22 through to step 25 are for an original Poly-800 HAWK
installation only
Step 22 - Install the Main Board back into the original Poly-800 Synthesizer
Reinstall the original main board (KLM-596).
●
Reinstall all main board mounting screws and the ground shields etc.
●
Ensure that you reconnect all cables to the main board.
●
Step 23 - Install the KLM-601 board into the original Poly-800 Synthesizer
Reinstall the KLM-601 board using the two original screws.
●
https://www.hawk800.com
19 Of 29