Assembly; Blower Nozzle - RedMax HBZ260R Operator's Manual

Blower nozzle

The blower tube has a pegged slot mounting system to
the unit.
• To install or remove the blower tube, the tube clamp
screw must be loosen.
• Align slot in the blower air outlet with the raised rib on
the intermediate tube and insert tube until the holes in
the tube and housing align.
• Re–tighten the tube clamp bolt.
3
1 Tube clamp screw
2 Intermediate tube
3 Round nozzle
10 – English
2

ASSEMBLY

1