Advertisement
Quick Links
Advertisement
Related Manuals for Genexis Pure F500
Summary of Contents for Genexis Pure F500
- Page 1 F500 & F501 Pure-Series Installation Guide...
-
Page 2: Port Overview
Press and hold the button for more than 10 seconds. Uplink ON/OFF button Green – link ok – no link This enables you to turn your Pure F500/F501 LAN ports ON or OFF. Internet (IP connectivity) Green – connected (DNS available) Green (blinking) –... - Page 3 Installation guide Placement Setting up the Pure Pure F500/F501 needs to be connected to an optical broadband network. Pure supports two placement options; 1. Plug the DC adapter into an electrical Multiple languages of this document and additional product information are available on standing and mounted to a wall.
-
Page 4: Troubleshooting
Manual setup Is the Status indicator LED off? Hereby, Genexis B. V . declares that the radio equipment type Pure F500/F501 is in compliance with 1. Make sure the WiFi indicator LED on the Check if the modem is properly connected Directive 2014/53/EU, Directive 2009/125/EC, Directive 2011/65/EU and Delegated Directive front panel is lit. - Page 5 Revision 1.2 - April 2020 Copyright © 2020 Genexis B. V . All rights reserved. Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.