Mounting The Bar And Chain - Stihl MSA 160 T Instruction Manual

Chain Scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
MSA 160 T

Mounting the Bar and Chain

Remove the battery from the
N
machine
Removing the chain sprocket cover
Unscrew nut (1) and remove chain
N
sprocket cover (2)
1
2
Turn screw (1) to the left until the
N
tensioner slide (2) butts against the
left end of the housing slot
Fitting the saw chain
WARNING
Put on protective gloves – risk of injury
by the sharp cutters.
Fit the chain starting at the nose of
N
the guide bar
English
13