Adjusting The Hedge Trimmer; Rotating The Control Handle; Inserting And Removing The Connecting Cord; Inserting The Connecting Cord - Stihl HSA 94 T Instruction Manual

13 Adjusting the Hedge Trimmer

► Insert the AP battery (4) into the battery compartment (5).
► Secure the battery with the hook and eye fastener (6).
3
The length of the connecting cord can be adjusted by
making a loop (1) and securing it to the top of the battery
bag (3) with the hook and eye buckle (2).
► Always position and secure the connecting cord so that it
will not interfere with proper working technique or your
ability to maintain control of the hedge trimmer.
13 Adjusting the Hedge Trimmer

13.1 Rotating the Control Handle

The control handle can be rotated to any one of three
positions to suit the application.
0458-722-8221-A
4
5
2
1
To rotate the control handle:
► Switch off the hedge trimmer, @ 15.2.
► Remove the connecting cord, @ 14.2.
6
► Ensure that the retaining latch (1) is in the locked
position.
► Pull up on the blocking lever (2) and hold it in this
unlocked position.
► Rotate the control handle (3) clockwise or counter-
clockwise.
► Release the blocking lever and return it to the locked
position.
► Rotate the control handle clockwise or counter-clockwise
to make sure it has engaged in position.
The control handle must be locked in place before inserting
the connecting cord and starting work.
14 Inserting and Removing the
Connecting Cord

14.1 Inserting the Connecting Cord

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 8. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 8.
1
2
English
3
27