Before First Use; Inserting Tools - Westfalia 34 07 45 Instruction Manual

Before first Use

Unpack the pneumatic drill hammer and check all parts for any damage in
transit. Dispose of packaging materials or store it out of reach of children.
Plastic bags etc. may become a deadly toy for children.
Attention! Unplug from the power supply before cleaning, maintaining or when
not in use.
Use only tool bits with SDS-Plus coupler! If the shank of the tool does not
match the coupler on the machine, the tool must not be used!

Inserting Tools

1. Lightly oil the shaft of the drill before inserting. Keep the guides and
grooves in the shaft clean.
2. To attach a drill or chisel, pull the SDS Plus chuck (9) back and insert the
tool into the chuck.
The tool has a slot with which a guide rail in the chick engages.
3. Slightly turn the tool while inserting until the grooves and guides lock into
each other. When the locking ring slides back into place, the tool is locked
into place. Before starting wok, check if the tool has firmly locked into
place.
4. To remove the tool, pull back the locking ring and pull the tool out of the
chuck.
Operation
13