Adjusting The Tone; Turning The Sound Off Temporarily (Muting); Switching The Brightness Of The Display - Denon RCD-CX1 Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<2/5> 1/3
<8/–, +/9>
[4/o]
[REPEAT/RANDOM]
[CH–/8, CH+/9]
1/3
[TIME/DISPLAY]
[VOLUME ]
df
[DIMMER]


Adjusting the Tone

1
[PURE DIRECT/TONE]
Press
BUTTON
want to adjust.
<BUTTON>
Pure D
[BUTTON]
(PURE DIRECT)
BALANCE
2
<SOURCE>
Adjust the volume with
b Thereafter, to adjust another mode, press
b If no operation is performed for 3 seconds, the adjustment is
retained and the normal display reappears.
[Selectable modes]
Pure D
: This is the mode that recreates the original sound most
(PURE
faithfully, providing extremely high quality sound.
DIRECT)
<VOLUME>
[Selectable items]
BASS
: Adjusts the bass sound.
[Variable range] –8dB ~ +8dB
TREBLE
: Adjusts the treble sound.
[Variable range] –8dB ~ +8dB
[NUMBER]
BALANCE
: Adjusts the left/right volume balance.
[6/p]
[Variable range] +L10
Press
[6/p]
and
Settings made upon purchase:
• Pure D (PURE DIRECT) ·············off
[2]
• BASS ·······································0dB
[TU–/6,TU+/7]
• TREBLE ···································0dB
[PURE DIRECT/
• BALANCE ························ CENTER
TONE]
[MUTE]
and select the mode you
BASS
TREBLE
[4/o, 6/p]
.
[PURE DIRECT/TONE]
on off
~ CENTER ~
+R10
[4/o]
when you want to adjust the left channel,
when you want to adjust the right channel.
When "Pure D" is set to "on" , digital output is switched off. What is
shown on the display also goes off. (When not playing or when no disc
is loaded, only part of the display is shown.)
NOTE
• When "Pure D" is set to "on", you cannot set "BASS" , "TREBLE" or
"BALANCE".
• When "Pure D" is set to "on" , you cannot use
.
Turning the Sound Off Temporarily
(Muting)
[MUTE]
Press .
The "Mute on" is displayed.
[MUTE]
To cancel, press again.
(The mute mode is also canceled when the
[VOLUME df]
is pressed.)

Switching the Brightness of the Display

[DIMMER]
Press .
100%
OFF
b The display's brightness switches each time the button is
pressed.
[DIMMER]
.
<VOLUME>
is turned or a
40%