Operations During Playback; Adjusting The Master Volume; Input Source Switching; Listening With Headphones - Denon RCD-CX1 Owner's Manual

Operations During Playback

Adjusting the Master Volume

<VOLUME> [VOLUME df]
Either turn or press
The volume level is displayed.
~
[Variable range] –90.0dB 0.0dB
b When lowering the volume from –90.0 dB, the display shows
"– –.– dB" .

Input Source Switching

SOURCE
Press to select input source.
CD TUNER
LINE2 LINE1 (iPod)
b The "iPod" indicator is displayed when a Control Dock for iPod is
connected. ("NO iPod" is displayed if no iPod is connected to the
Control Dock for iPod.)

Listening with Headphones

Plug the headphones (sold separately) into the
b The sound from the speakers is automatically cut off.
NOTE
Be careful not to set the volume too high when using headphones.

Adjusting the Tone

1
[PURE DIRECT/TONE]
Press
want to adjust.
Pure D
(PURE DIRECT)
.
BALANCE
2
Adjust the volume with
b Thereafter, to adjust another mode, press
b If no operation is performed for 3 seconds, the adjustment is
retained and the normal display reappears.
[Selectable modes]
Pure D
: This is the mode that recreates the original sound most
(PURE
faithfully, providing extremely high quality sound.
DIRECT)
PHONO
[Selectable items]
b
BASS
: Adjusts the bass sound.
[Variable range] –8dB ~ +8dB
TREBLE
: Adjusts the treble sound.
[Variable range] –8dB ~ +8dB
BALANCE
: Adjusts the left/right volume balance.
[Variable range] +L10
<PHONES>
.
[4/o]
Press
[6/p]
and
Settings made upon purchase:
• Pure D (PURE DIRECT) ·············off
• BASS ·······································0dB
• TREBLE ···································0dB
• BALANCE ························ CENTER
and select the mode you
BASS
TREBLE
[4/o, 6/p]
.
[PURE DIRECT/TONE]
.
on off
~ CENTER ~
+R10
when you want to adjust the left channel,
when you want to adjust the right channel.
When "Pure D" is set to "on" , digital output is switched off. What is
shown on the display also goes off. (When not playing or when no disc
is loaded, only part of the display is shown.)
NOTE
• When "Pure D" is set to "on", you cannot set "BASS" , "TREBLE" or
"BALANCE".
• When "Pure D" is set to "on" , you cannot use
Turning the Sound Off Temporarily
(Muting)
[MUTE]
Press .
The "Mute on" is displayed.
[MUTE]
To cancel, press again.
<VOLUME>
(The mute mode is also canceled when the
[VOLUME df]
is pressed.)

Switching the Brightness of the Display

[DIMMER]
Press .
100%
OFF
b The display's brightness switches each time the button is
pressed.
ENGLISH
[DIMMER]
.
is turned or a
40%