Selecting The Input Source; Adjusting The Volume; Turning Off The Sound Temporarily - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Selecting the input source

1
Press the input source select button to be played back.
The selected input source appears on the display.
0 This unit switches between FM and AM each time TUNER is pressed.
0 This unit switches between Optical In 1 and 2 each time OPTICAL IN is pressed.
0 You can also select the input source by touching q on the main unit.
Front/Top
Rear panel
panel
Playback Settings

Adjusting the volume

1
0 You can also adjust the volume by touching VOLUME df on the main unit.

Turning off the sound temporarily

(Muting)
1
0 To cancel mute, either adjust the sound volume or press MUTE : again.
33
Remote control
unit
Tips
Use VOLUME df to adjust the volume.
The volume level appears on the display.
Press MUTE :.
"Mute" is displayed on the display.
Index
Appendix