Firmware; Check For Update; Auto-Update; Time Zone - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Firmware

Checks for and installs the latest firmware information updates and
upgrades. Also sets the upgrade notification message display.
o Check for Update
Check for firmware updates.
The firmware can be updated if a firmware update has been released.
Update Now:
Update Later:
0 This unit automatically retries updating if updating fails. If an update still
cannot be performed, an "Update Error" message appears in the display. See
"Troubleshooting" – "Update/upgrade error messages" for information on
update error messages. (v p. 123)
Check the conditions according to the message and try the update again.
0 This menu cannot be selected when "Allow Update" is set to "Off".
Front/Top
Rear panel
panel
Playback
Execute the update process. During the
update, the progress is shown on the
display.
Update later.
Remote control
unit
Settings
o Auto-Update
This unit will automatically update to the newest firmware when in
standby mode.
n Auto-Update
This unit will automatically update to the newest firmware when in
standby mode.
On:
Off
(Default):
n Time Zone
Change the time zone.
Set the time zone that matches the area where you live.
0 This menu cannot be selected when "Allow Update" is set to "Off".
0 When Time Zone is changed, the Time Zone setting for "Clock" in the menu
changes too. (v p. 88)
92
Index
Tips Appendix
Turns on Automatic Updates.
Turns off Automatic Updates.