Resetting Network Settings - Denon CEOL RCD-N10 Owner's Manual

Contents Connections

Resetting network settings

If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. (v p. 107)
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu "Audio" settings are not reset.
Front/Top
Rear panel
panel
Playback
1
BACK
2
3
4
5
0 Do not turn the power off until reset is complete.
124
Remote control
unit
Settings Tips
Press X on the main unit to turn on power to the unit.
Touch q on the main unit and select "Internet Radio",
"Music Servers" or "USB Music".
With unit power on, touch BACK on the main unit while
pressing and holding X for at least three seconds.
Remove your fingers from the two buttons when
"Please wait..." appears on the display.
"Completed" is shown in the display when reset is
complete.
NOTE
Index
Appendix