Subscribe to Our Youtube Channel
Related Manuals for Arrowquip Q-CATCH 86 Series
Summary of Contents for Arrowquip Q-CATCH 86 Series
- Page 1 Q-CATCH 86 SERIES CATTLE CRUSH PRODUCT MANUAL +44 (0) 1530 632002 cs@arrowquip.com arrowquip.co.uk...
-
Page 3: Table Of Contents
CONTENTS Safety Precautions Risk Assessment Q-Catch 86 Series Head Gate Assembly Operating the Head Gate Recommended Maintenance Warranty Troubleshooting Guide Q-Catch 86 Series Options... -
Page 4: Safety Precautions
IS OPERATED, OR RESULTING FROM A LACK OF SAFETY PRECAUTIONS ARE THE SOLE RESPONSIBILITY OF THE OPERATOR. All farm machinery and equipment is potentially dangerous. Careless use of any Arrowquip livestock equipment may cause injury or damage to persons, cattle,... -
Page 5: Risk Assessment
Arrowquip has taken precautions in the design and manufacturing of this product to ensure that it is safe and user-friendly. Therefore, the user must assume all responsibility and risk associated with the possession and use of the equipment. -
Page 6: Q-Catch 86 Series Head Gate Assembly
4. Some chemicals and medicines can damage powder coat. Take all precautions and wash after use. Q-CATCH 86 SERIES HEAD GATE ASSEMBLY Your crush will come with the head gate fully assembled and ready for use. However, if you need to dissemble your head gate for any reason, the following guide will help you to properly reassemble your crush. -
Page 7: Operating The Head Gate
OPERATING THE HEAD GATE REMEMBER SAFETY WHEN OPERATING THE HEAD GATE 1. Ensure all gates and the head gate are closed before the animal enters the crush. 2. Open tail gate for the animal to enter the cattle crush enclosure. 3. -
Page 8: Recommended Maintenance
Your product must be registered to claim warranty, and to ensure that Arrowquip has the required information to contact you in the event of a product or part recall. If the owner of the equipment fails to register the product with Arrowquip, they are considered to have voluntary voided the warranty. -
Page 9: Troubleshooting Guide
PHONE: +44 (0) 1530 632002 | EMAIL: sales@arrowquip.com TROUBLESHOOTING GUIDE If you have a problem with your Q-Catch 86 Series cattle crush, please consider the following tips or call us at +44 (0) 1530 632002. 1. Make sure the head gate and crush are situated on level ground or base. -
Page 10: Q-Catch 86 Series Options
7. Check nuts and bolts on items and ensure that they are tightened correctly. Q-CATCH 86 SERIES OPTIONS Q-CATCH HEAD HOLDER INSTALLATION: 1. Rest head holder on the bottom 1.5" spacer on working side of head gate. - Page 12 +44 (0) 1530 632002 | cs@arrowquip.com | arrowquip.co.uk Printed in Canada.
Need help?
Do you have a question about the Q-CATCH 86 Series and is the answer not in the manual?
Questions and answers