Sun Microsystems StorEdge A1000 Installation Manual page 5

End piece
A Single Tower Stand
FIGURE 2
Prepare the Stands
1. Install the optional footpads on the underside of the tower stands.
The optional footpads make sliding the stands easier.
a. Turn the stand so you can see the underside.
See .
FIGURE 3
b. Fit the footpads over the end areas.
2. Open each tower stand enough to allow the system to be lowered easily between
the end pieces.
a. Turn the stand so you can see the underside.
See .
FIGURE 3
Foot compartment
Sun StorEdge A1000 and D1000 Tower Stand Installation 3