Table of Contents
Advertisement
The moisture trap is a 50 mm PVC 'T" Junction with a small hole in the push-on
cap base. Any rain or condensation draining from the vent pipe will be trapped in
this junction instead of wetting the fan and shortening its life. The water drains
from the hole which needs to be cleaned regularly.
Once the toilet is permanently connected to the 'T' piece you may attach the fibreglass toilet
bottom to the floor with the self tapping screws and nylon washers (supplied) and / or an seal-
ant (not supplied).
Page 9
IMNL-003.181008
© Ecoflo Wastewater Management Pty Ltd
Advertisement
Table of Contents
