Table of Contents
Advertisement
Excelet Chamber
Fit the 40mm rubber washer around the threaded part of the 40mm MI adaptor. Push this end through
the hole in the rear wall of the compost chamber. While holding the socket in place put the 40mm DWV
PVC pipe with the 90
that the elbow is now aligned with the threaded end of the socket and screw these components together.
The socket and elbow should now be firm against the wall of the chamber and the pipe with the elbow
resting just below the false floor. Use a multitool wrench if you cannot tighten the socket sufficiently by
hand.
IMNL-003.181008
o
elbow into the hole in the floor at the back of the chamber. Angle this pipe such
© Ecoflo Wastewater Management Pty Ltd
Once finished the compost chamber should look
like the picture above. Repeat for all remaining
chambers.
Page 14
Advertisement
Table of Contents
