Table of Contents
Advertisement
Installation Guide | VLT® Programmable I/O MCB 115
2 Safety
2.1 Safety Symbols
The following symbols are used in this manual:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example messages relating to property damage).
2.2 Qualified Personnel
The products must only be assembled, installed, programmed, commissioned, maintained, and decommissioned by persons with
proven skills. Persons with proven skills:
•
Are qualified electrical engineers, or persons who have received training from qualified electrical engineers and are suitably
experienced to operate devices, systems, plant, and machinery in accordance with the general standards and guidelines for safety
technology.
•
Are familiar with the basic regulations concerning health and safety/accident prevention.
•
Have read and understood the safety guidelines given in this manual and also the instructions given in the operating guide of the
drive.
•
Have good knowledge of the generic and specialist standards applicable to the specific application.
6 | Danfoss A/S © 2020.01
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
AN295938195323en-000101 / 130R0655
Safety
Advertisement
Table of Contents
