Switch Lock - Panasonic ES‑ST2N Operating Instructions Manual

When the battery capacity is low
The charge status lamp (
second when operating the shaver.
• You can shave 2 to 3 times after the charge
status lamp ( ) blinks. (This will differ
depending on usage.)
► Using the trimmer
Slide the trimmer handle up. Place at a right
angle to your skin and move downwards to trim
your sideburns.
► Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns
► Notes
• The "shaving sensor", which automatically adjusts the power
depending on the beard thickness, will operate.
It will shave with high power on areas where the beard is heavy,
and reduce the power on areas where the beard is thin, to
reduce burden on the skin.
• Before shaving, check that the cleaning shutter is closed.
• After wet shaving, wash the main body with water and apply oil
to the system outer foil.
12
ES-ST2N_US.indb 12
) blinks once every
Pre‑shave of long beards
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• The appliance may not operate in an ambient temperature lower
than approximately 5 °C (41 °F).
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel. This is not abnormal.
• To prevent erroneous operation, place your fingers on the thumb
rest while using the shaver.
Operation and display of the switch lock
►Locking the power switch
1. Press once 2. Press
and then release. more than
• The shaver
2 seconds.
• The switch lock
starts operating.
lamp (
light up for
5 seconds and
turn off.
• The shaver will
stop operating.
for 3. Release .
) will
2016/06/09 14:23:02