Cleaning The Shaver - Panasonic ES‑ST2N Operating Instructions Manual

►Unlocking the power switch
1. Press for more than
2 seconds.
• The switch lock lamp (
will turn off.
• The power switch cannot be unlocked while charging.
• The power switch is locked when the switch lock lamp (
for 5 seconds and the shaver does not operate even though the
power switch is pressed.

Cleaning the shaver

We recommend cleaning the shaver after each use.
1. Turn the shaver off and disconnect the AC
adaptor.
2. Apply some hand soap and some water to the
system outer foil.
• Close the cleaning shutter.
3. Turn the shaver on.
There are two ways to clean the shaver, depending on the
actual dirt level.
▼
ES-ST2N_US.indb 13
2. Once the shaver starts
operating, release .
)
) blinks
▼
▼
▼
To remove light dirt
4. Slide the cleaning shutter
until it clicks.
5. Clean the outer foil section
with running water.
6. Turn the shaver off.
• Rinse with water and
shake up and down several
times to remove the water.
▼
▼
To remove heavy dirt
4. Turn the shaver off after
10 – 20 seconds.
5. Remove the outer foil section
and turn the shaver on.
6. Clean the shaver and the
outer foil section with
running water.
• Rinse with water and
shake up and down several
times to remove the water.
▼
13
2016/06/09 14:23:03