Operating Instructions; Commissioning And Setting - Pentair PCFE40P12 Owner's Manual

5. OPERATING INSTRUCTIONS

________________________________________________________________________________________________________________________________________

5.1. Commissioning and Setting

DIRECTIONS
Commissioning and setting
Control Valve panel
Description of Control Valve panel display
1. Indicates water flow when displayed. Arrows alternate faster as flow increases.
2. When "MIN" is displayed, the value in minute increments. "MIN" is displayed during
Backflush; the value displayed is the minutes of Backflush remaining.
3. Colon (double dots) flashes as part of the time display. It Indicates normal operation.
4. Four digits used to display the time or program value. It also used for error codes.
5. The Backflush sign is displayed (flashing) when a next Backflush has been called for. Also
displays (continuously) when in Backflush.
6. When "x2" is displayed, a second Backflush has been called for.
7. The hourglass is displayed when the motor is running.
NOTE: During normal operation (Service mode) the display will show the current time of the
day with the colon (double dots) blinking. This will alternate with a display of the – filtered
water volume.
_________________________________________________________________________________________________________________________________________
14
Display Icons
Copyright© Pentair