Reset The Label Printer; Reset All Settings To The Factory Settings Using The Label Printer Buttons; Reset Data Using The Printer Setting Tool - Brother QL-1100 User Manual

14

Reset the Label Printer

Reset the internal memory of your printer to clear all the saved label files, or if the printer is not operating
correctly.
Reset All Settings to the Factory Settings Using the Label
Printer Buttons
To reset the printer, do the following:
a
Turn the printer off.
b
Press and hold the Power ( ) and Cutter ( ) Buttons for about one second. The Status LED lights in
orange and the Editor Lite LED flashes in green.
c
Continue holding down the Power (
d
Release the Power ( ) Button. The Status LED flashes orange and the Editor Lite LED flashes green
four times. Then, the Status LED lights in orange and the Editor Lite LED lights in green.

Reset Data Using the Printer Setting Tool

You can also use the Printer Setting Tool from your computer to reset all printer settings to the factory
settings.
For more information, see Factory Reset on page 24.
) Button, and press the Cutter ( ) Button six times.
14
14
14
14
107