auna iTuner 320 BT Manual page 48

EN
48
Language
1. During System settings mode, press the / buttons to select Language
and then press the SELECT button to confirm.
2. Press the / buttons to change the display language of your choice.
3. Press the SELECT button to confirm..
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer
be available.
1. During System settings mode, press the 
reset", and press the SELECT button to confirm.
/
2. Press the   buttons to select Yes, and press the SELECT button to
confirm or select No to cancel.
After the system reset, all the tuned stations, Internet, DAB & FM preset
stations will be erased.
Software update
1. During System settings mode, press the 
update and then press the SELECT button to confirm.
2. Press the / buttons to select Auto-check setting or Check now, and then
press the SELECT button toconfirm.
Before downloading software, ensure that the radio is plugged into a stable
mains power connection. Interrupting the mains supply during software
download can lead to functional disturbances and/or damage to the unit!
Setup wizard
The setup wizard is available in the system settings section; you can run
through this to configure settings for date/time and network. Once this has
finished, your radio is ready to use.
Info
1. During System settings mode, press the 
then press the SELECT button to confirm.
2. The software version, Spotify version, Radio ID and Friendly Name will
show on the display.
/
 buttons to select "Factory
/
 buttons to select Software
/
 buttons to select Info and