NEC mPD789426 Series User Manual page 101

8-bit single-chip
Table of Contents

Advertisement

(7)
Pull-up resistor option register B9 (PUB9)
Pull-up resistor option register B9 (PUB9) sets whether on-chip pull-up resistors on P90 to P97 are used or
not. On the port specified to use an on-chip pull-up resistor by PUB9, the pull-up resistor can be internally
used only for bits set in the input mode. No on-chip pull-up resistors can be used for the bits set in the output
mode regardless of the setting of PUB9. This also applies to when the pins are used for alternate function.
PUB9 is set with a 1-bit or 8-bit memory manipulation instruction.
RESET input sets PUB9 to 00H.
Note Incorporated only in the µ PD789426 and 789436 Subseries.
Figure 4-24. Format of Pull-Up Resistor Option Register B9
Symbol
<7>
<6>
<5>
PUB9
PUB97 PUB96 PUB95 PUB94 PUB93 PUB92 PUB91 PUB90
PUB9n
0
On-chip pull-up resistor not used
On-chip pull-up resistor used
1
CHAPTER 4 PORT FUNCTIONS
Note
<4>
<3>
<2>
<1>
P9n on-chip pull-up resistor selection
User's Manual U15075EJ1V0UM00
<0>
Address
After reset
FF39H
00H
(n = 0 to 7)
R/W
R/W
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpd789436 seriesMpd789446 seriesMpd789456 seriesMpd789425Mpd789445Mpd789426 ... Show all

Table of Contents