System Error Record Editing Program (Serep) - IBM System/370 145 Operating Procedures Manual

SYSTEM ERROR RECORD AND EDITING
PROGRAM (SEREP)
SEREP is a self-loading program used to retrieve and edit
hardware logout information. It provides a hard copy listing
of available data pertinent to the error. SEREP does not
perform any diagnostic function except to provide edited
logout data for the service representative.
When to Use
SEREP is run after a machine check, channel control check,
or interface control check when operating with a control
program not using the automatic logging of error data on an
external storage device. The system must be run with the
CHECK CONTROL switch set to the STOP AFTER LOG
position. When a log is present in the log area of storage,
the LOG PRES and MAN indicators are on, and SEREP
should be run. Save the error data for the service repre-
sentative.
@]
§o' E _:
~o"':_
o:~
B
El~
~o
c::::::::::J
O[§]
C!JO
o
BE]
LOG
PRES
o
Oporating Procedures 79