Print Element Removal And Replacement (3210) - IBM System/370 145 Operating Procedures Manual

PRINT ELEMENT REMOVAL and REPLACEMENT (3210)
Removal
1. Press the NOT READY key.
2 Raise the printer cover.
3. Note the direction of the arrow on the print element.
4. Lift the print element release lever.
5. Lift the print element off the print element post.
Print Element
Release Lever
Print Element
Print Element Post
38
Replacement
1. I nstall the print element on the print element post with
the arrow pointing in the same direction it was on'
removal.
2. Lower the print release lever to lock the print element in
In
place.