Lcd Display - Pego PLUS100 AB Use And Maintenance Manual

CHAP. 5 – Parameter programming

 
1. Ambient temperature / parameters (for values greater than +45°C the word HOT is
displayed).
2. Evaporator temperature / product sensor temperature / day of current month (see
setting on parameter tEu on 1
programming) (for values greater than +45°C the word HOT is displayed).
3. Time / date / time parameter values.
4. Programming (control is in programming mode).
5. Cold (compressor call indicator).
6. Defrost.
7. Fans (flashing during fan stop – parameter F5).
8. Light.
9. Alarm.
10. Stand-by (flashing in stand-by. Outputs deactivated).
Rev. 02-18

LCD DISPLAY

    
st
level programming) / parameters (during
USE AND MAINTENANCE MANUAL
PLUS100 AB
5.3


Page 11