Moving The Meat Pan And Cover; Changing The Light Bulb; Removing Crispers And Crisper Cover; Removtng The Freezer Shelf - Whirlpool ET14AK Use & Care Manual

Moving the meat pan and cover...
The meat pan and cover can be removed for
cleaning and moved to another shelf, If desired
Remove the meat pan frrst.
Changing the light bulb...
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigerutor at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
Removing crispers and crisper cover.. .
Removing:
I. Slide the pan out to stop
2. Lift the front of meat pan
3. Slide pan the rest of the way out
4. Tilt cover up at front
5. Pull forward and out
Replacing:
1 Fit notches underneath cover over rear and center
cross bars on shelf
2 Lower cover In place.
3 Replace meat pan in reverse order
L1f1 the Front. Then the Back
Pull out to stop
ronl and Pull Agaln
Removing the freezer shelf.. .
, ,
1. Reach behind control console to find bulb
2. Remove bulb.
3 Replace with a 40-w& appliance bulb.
Removing Crispers:
1 Slide crisper straight out to stop.
2 Lrft the front
3. Slide the rest of the way out.
4. Replace in reverse order
Remove Cover:
1 Loft front, then lift back.
2 Pull up and out
Replacing Cover:
1 Fit notches on back of cover into back nubs on
wall of refrigerator
2 Lower front into place
1 Loft front slrghtl\
2 Lrft back off scioports
3 Replace rn reverse order
lift the Front
Then the Back
Adjusting the refrigerator shelves...
1 Frrs, remove food from shelf
2 ShUe shelf straight out to stop
3 Lift front
4 Sllue the rest c ' the +KW out
Guide Stop
Replacing Shelf:
1 Fit bock of shelf on top of guides wltn wire stops
on the bottom of auldes
2 Lift front, slide jheif rn un?ll It clears guide stops
-\Shelf G uide
6