Table of Contents
Advertisement
Adjusting the refrigerator
shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strong enough
to
hold bottles,
milk and other heavy food items.
Gloss shelves are
heovy Be careful.
Moving the meat pan and cover...
The meat pan can be taken out and moved the
same way as the shelves. Remove the meat pan first.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace:
1. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removlng:
I, Slide the meat pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out
4. Tilt cover up at front.
5. Lift up at back.
6. Pull straight out.
Replaolng:
I. Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of cover until rear hooks drop into slots.
Lower front of cover to level position.
3. Replace
meat pan in reverse order.
Removing the crispers and crisper covers...
I
Removlng crispers:
1. Slide crispers straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace
in reverse order,
Push the lab
to
Clear
the Cover.
Removlng covers:
Covers are held in by two pegs at the back and
notched
tabs in front.
-
1. Press front out of way,
2. Lift cover front.
3. Lift back out of pegs.
4. Replace
in reverse order
Removing the freezer shelf.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order,
Lltt the Front
Then the Back
Snap Back
into Place.
If necessary, the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwise to make it longerTurn the leg counterclock-
wise to shorten it.
Ice cube trays.. .
If cubes are not used, they may shrink. The moving
cold air starts a slow evapcration.
The longer cubes
are stored. the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Slightly twist.
6
Advertisement
Table of Contents
