Changing The Light Bulb; Moving The Meat Pan And Cover; Adjusting The Refrigerator Shelves; Removing The Crispers And Cover - Whirlpool ETl8TK Use And Care Manual

Changing the light bulb.. .
Unplug the refrigerator first.
I, Reach behind control console to find bulb.
2. Remove bulb.
3. Replace with a 40-watt appliance bulb.
The meat pan and cover can be removed for
cleaning and moved to another shelf, if desired.
Remove the meat pan first.
Removing:
1. Slide the pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out.
4. Tilt cover up at front.
5. Pull forward and out.
Replacing:
1. Fit notches underneath cover over rear and center
cross bars on shelf.
2. Lower cover in place.
3. Replace meat pan in reverse order.
Adjusting the
I. First, remove food
2. Slide shelf straight
3. Lift front.
refrigerator
from shelf.
out to stop.
Shelf Stop -
4.
Slide the rest of the way out
Replacing Shell:
1
1. Frt back of shelf on top of gutdes with wire stops
1
on the bottom of guides.
2 Lift front, slide shelf in until It clears guide stops.
Shell 61
Removing crispers and crisper cover.. .
Removing
me
Crispers:
I, Slide crisper straight out to stop, lift front, then slide
Lift the Front, Then the Back
_ ---...
A
the rest of the way out,
2. Replace in the reverse order.
Removing Cover:
I, Lift front and remove the cover support
2. Lift out cover by pulling up and out
Replacing Cover:
1. Fit back of cover into notch supports on walls of
refrigerator, then lower front into place.
2. Replace cover support with the long tab towards
the front.
Note:
If support needs adjustment, turn
base right to lower, or left to raise.
Removing and Adjusting the freezer shelf...
To remove shelf:
I. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order
To adjust shelf:
I, Remove shelf.
2. Remove supports by sliding upwards
3. Replace supports on desired level.
4. Replace shelf.
6
Shett Support