Appendix; Declaration Of Conformity - Ametek CDN 118A Series Operating Manual

AMETEK CTS
9.

Appendix

9.1.

Declaration of conformity

Manufacturer:
Address:
declare, that under is sole responsibility, the product's listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product's name:
Model Number(s)
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1: 2011
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1: 2012
EN 61000-3-2: 2007
EN 61000-3-3: 2013
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing. De-
pending on the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a
significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
By
Place
Date
Operating manual
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach BL1
Switzerland
Coupling decoupling network for surge pulses
CDN 118A-C4-4-1
CDN 118A-C6-4-1
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
Electrical equipment for measurement, control and laboratory use Class A
Not applicable
Not applicable
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Phone: +41 61 204 41 11
Fax: +41 61 204 41 00
A. Burger
Director Engineering AMETEK CTS
Reinach BL, Switzerland
10. October 2018
V 1.00
CDN 118A series
23 / 26