Maintenance, Adjustments, Replacement Of Parts - Ametek CDN 118A Series Operating Manual

AMETEK CTS
6.3.

Maintenance, Adjustments, Replacement of Parts

ATTENTION
The generators do not contain any parts or components requiring special maintenance.
Electrical maintenance must only be performed by experienced and specially trained technicians. Generally,
standard maintenance requires only the periodic cleaning of the instrument, verification and calibration of certain
parameters.
•
When removing the cover or other parts of the equipment, high voltage parts may become exposed. High
voltages are potentially lethal.
•
For service, repair, adjustment or replacement of parts, the generator must be disconnected from all power
supply sources before covers are to be removed.
•
The user is not permitted to change or modify any EM TEST generator. Only original EM TEST parts and
components shall be used for repair and service. EM TEST is not responsible for accidents or injuries caused
through the use of parts or components not sold by EM TEST...
•
Maintenance and service must only be performed by qualified service technicians who are trained and famil-
iar with the dangers of servicing the EM TEST generator.
•
Only fuses of correct voltage and amperage as specified by the manufacturer are to be used for replacement.
The repair of fuses is not permitted.
Operating manual
Electrical maintenance must only be performed by
qualified service technicians...
V 1.00
CDN 118A series
17 / 26