Table of Contents
Advertisement
AMETEK CTS
8.
Appendix
8.1.
Declaration of conformity
Manufacturer:
Address:
Declares, that under is sole responsibility, the product's listed below, including all their options, are conformity with
the applicable CE directives listed below using the relevant section of the following EC standards and other
normative documents.
Product's name:
Model Number(s)
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
The purpose of this instrument is to couple defined interferences signals (surge impulses) for EMI immunity
testing. The device includes only passive components like resistors, capatitances and inductors. Depending on
the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a significant
amount of electromagnetic radiation may result that could also affect other equipment and systems. The user
himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of doubt,
the tests should be carried out in a Faraday cage.
By
Place
Date
Operation Manual
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach
Switzerland
CDN 117A series coupling decoupling network for surge & Ringw wave pulses
NSG 117A C4-4-1,
NSG 117A C6-4-1
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area).
Limits for harmonic current emissions, (not applicable).
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems, (not applicable).
Manufacturer
AMETEK CTS GmbH
Sternenhofstr. 15
CH 4153 Reinach
Tel:
+41 61-7179191
Fax:
+41 61-7179199
A. Burger
Director Engineering AMETEK CTS
Reinach BL, Switzerland
2. April 2019
V 1.00
CDN 117A series
24 / 30
Advertisement
Table of Contents
