Advertisement
STEP 9
You will need:
2 x Drawer runners (H6)
4 x 13mm C/S screws (H1)
1
Insert a small amount of glue into the dowel holes provided on the
Drawer Front (P13) and the Drawer Back (P16).
2
Align dowels on drawer side (P15) with holes on Drawer Front (P13)
and bring together. Slide the Drawer Bottom (P18) into the groves on
the Drawer Sides (P15) making sure it finishes in the grove of the
Drawer Front (P13).
3.
Align dowels on drawer side (P15) with holes on Drawer Back (P16)
and bring together.
2
Using the angled part of the drawer runners (H6), fix Drawer runners
(H6) to base of drawer AS SHOWN using the 13mm C/S Screws (H1).
www.fantasticfurniture.com.au
1 x Glue (H4)
P16
P18
P15
P13
PAGE 14
Advertisement
