Advertisement
STEP 10
You will need:
2 x Drawer runners (H6)
4 x 13mm C/S screws (H1)
1
Insert a small amount of glue Into the dowel holes provided on the File
Drawer Front (P14) and the File Drawer Back (P17)
2
Align dowels on Drawer side (P15) and File Rod (H9) with holes on File
Drawer Front (P14) and bring together. Slide the Drawer Bottom (P18)
into the groves on the Drawer Sides (P15) making sure it finishes in the
grove of the Drawer Front (P14).
3.
Align dowels on drawer side (P15) and File Rod (H9) with holes on
Drawer Back (P17) and bring together.
4
Using the angled part of the drawer runners (H6), fix Drawer runners
(H6) to base of drawer AS SHOWN using the 13mm C/S Screws (H1).
www.fantasticfurniture.com.au
1 x Glue (H4)
2 x File Rods (H9)
P17
P18
P15
P14
PAGE 15
Advertisement
