Figure 1. Series Nrx Nameplate Location - Eaton NRX Series User Manual

Series NRX Low Voltage Power (Air)
Circuit Breakers User Manual
Product Labeling and Identification
The circuit breaker nameplate, located on the right side of the breaker,
provides complete rating information and should always be inspected
to ensure the information shown is in keeping with the product
ordered (Figure 1). Become familiar with the nameplate.
Rated short-circuit breaker capacity (ultimate)
Rated short-circuit breaker capacity (service)

Figure 1. Series NRX Nameplate Location

Frame Type
Applicable Rating Plug Group
Standards
Max rated current of the frame
Poles
Max rated voltage and
frequency
Rated operational voltage
Rated short time withstand
Mnf. date code
(YYMMDD)
Mnf. barcode
Breaker manual
(EN)
Instructional Book
SERIES NRX CIRCUIT BREAKERS SHOULD NOT UNDER ANY CIRCUMSTANCES
BE APPLIED OUTSIDE THEIR NAMEPLATE RATINGS. OPERATION OUTSIDE OF
THESE RATINGS COULD RESULT IN DEATH, BODILY INJURY, OR PROPERTY
DAMAGE.
,V
,V
,V ,V
,V
EATON CORPORATION www.eaton.com
MN01301003E
Effective July 2011
WARNING
Product Coding
Disconnected function
Utilization category
Rated insulation voltage
Rated impulse withstand
voltage
Direction for use
in IT system
Third party
certification markings
Factory installed
accessories
Order information
20-digit catalog string
Additional third party
markings
Mnf. location
5