Here are a few things you will want to know
about your automatic ice maker:
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically.
UP to shut off the ice maker.
NOTE: Do not turn ice maker on until it is
connected to the water supply. Instructions
for ice maker water supply
hook up are
to the back of the refrigerator
It is normal for ice crescents to be attached
corner. They break apart easily.
The ice maker will not operate until the
freezer is cold enough to make ice. This can
If ice is not being made fast enough and
more ice is needed, turn the Refrigerator
Control toward a higher number. Wait a day
and, if necessary, turn the Freezer Control
Good water quality is important for good ice
quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals (such as salt from
softener) can damage the ice
maker mold and lead to poor ice quality. If a
softened water supply cannot be avoided,
make sure the water softener is operating
properly and well maintained.