Changing The Control Settings - Whirlpool ED22HP Use And Care Manual

3. Give the refrigerator time to cool down
completely before adding food. This may
take several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls are set correctly
when milk or juice is as cold
as
you like
and when ice cream is firm. lf you need to
adjust these settings, see "Changing the
control settings" below.
NOTE:
The Automatic Exteriir Moisture
control continuousty guards against moisture
build-up on the outside of your refrigerator
cabinet. This control does not have to be set
or adjusted.
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings
listed in the chart below as
a
guide. If
you have questions, call our Consumer
Assistance Center number, 1-800-253-l 301.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
REASON:
RECOMMENDED
CONTROL SElTlNGS:
I
Refrigerator
section
too warm
l
Door opened often
l
Large amount of food added
l
Room temoerature too warm
Refrigerator 4
Freezer A
Freezer
l
Door opened often
Refrigerator 3
section
l
Large amount of food added
Freezer C
too warm
l
Very cokf room temperature
I
(can't cycle often enough)
Refrigerator
l
Controls not set correctly
Refrigerator 2
section
for your conditions
Freezer El
too cold
Ice not
l
Heavy ice usage
made fast
l
Very coM room temperature
Refrigerator 3
Freezer C
enough
(can't cycle often enough)
Both
sections
too warm
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Refrigerator 4
Freezer B
I