Removing The Tall-Bottle Retainer; Adjusting The Refrigerator Shelves; Using The Egg Bin - Whirlpool ED22HP Use And Care Manual

.-
-
Removing the tall-bottle retainer
The tall-bottle retainer fits onto any door bin
in your refrigerator. The retainer helps to
hold tall-bottles in place when opening and
closing the refrigerator door.
To remove tall-bottle retainer:
1.
Grasp center of retainer.
2. Pull up and off of bin.
To replace tall-bottle retainer:
1.
Position retainer above desired door bin.
2. Gently push retainer down onto bin.
3. Make sure both side notches sit firmly
against bin.
Notch
Adjusting the refrigerator shelves
Adjust shelves to match the way you use your
refrigerator. Glass shelves are strong enough to
hold bottles, milk and other heavy food items.
To remove the shelves:
1.
Remove items from the shelf.
2. Tilt shelf up at front.
3. Lii shelf up at back.
4. Pull shelf straight out.
To replace the shelves:
1.
Guide the rear shelf hooks into the slots in
the shelf supports on the back liner wall.
2. Tilt front of shelf up until hooks drop into slots.
3. Lower front of shelf to a level position.
Be careful when
handling glass items.
Using the egg bin
The egg bin has two pieces -the lid and the
bin. Use the egg bin to hold one, two or three
dozen eggs.
To hold one dozen eggs:
Place a dozen eggs (in or out of carton) in
the bin and cover with the lid.
To hold two dozen eggs:
Place two dozen eggs loose in the bin and
cover with the lid.
To hold three dozen eggs:
Place two dozen eggs loose in the bin. Invert
the lid and place it on the bin. Put a dozen
eggs, in their carton, on top of the lid.
10
Lid
Bin